Body Solid Pro Clubline 3-tier Dumbbell RackSDKR1000DB
Both the SDKRDBS and SDKRDBL are flat dumbbell shelves that can fit any of the SDR Rubber Dumbbells, SDX Hex Dumbbells, SDP Pro Dumbbells or the Vinyl or Neoprene coated Dumbbells. The SDKRDBS has a surface space of 59" x 12". The SDKRDBL has a surface area of 59" x 18". The SDKRDBS is perfect for any size up to 100lb dumbbells. The SDKRDBL is perfect for dumbbells 105-120lbs.
Body Solid Pro Clubline SDKR1000DB Features:
Use the chart below to determine the approximate amount of dumbbells each shelf can hold.
PLEASE NOTE: if you are building a rack using components, the SDKRDBL large dumbbell tray can only fit on the bottom tier. It cannot fit on the top tiers of these racks.
| DUMBBELLS | SDR | SDX | SDP |
| 3LB | 2.50" | 2.20" | N/A |
| 5LB | 3.00" | 2.50" | 4.80" |
| 8LB | 3.50" | 3.26" | N/A |
| 10LB | 4.00" | 3.5.0" | 4.80" |
| 12LB | 4.25" | 3.75" | N/A |
| 15LB | 4.50" | 4.00" | 5.87" |
| 20LB | 5.00" | 4.50" | 5.87" |
| 25LB | 5.50" | 4.80" | 6.00" |
| 30LB | 5.75" | 5.25" | 6.00" |
| 35LB | 6.00" | 5.66" | 8.00" |
| 40LB | 6.50" | 5.75" | 8.00" |
| 45LB | 6.75" | 6.00" | 8.00" |
| 50LB | 6.81" | 6.20" | 8.00" |
| 55LB | 7.00" | 6.50" | 8.00" |
| 60LB | 7.34" | 6.50" | 8.00" |
| 65LB | 7.50" | 7.00" | 8.00" |
| 70LB | 7.67" | 7.11" | 8.00" |
| 75LB | 7.77" | 7.3" | 8.00" |
| 80LB | 7.90" | 7.34" | 8.00" |
| 85LB | 8.17" | 7.45" | 8.00" |
| 90LB | 8.50" | 7.77" | 8.00" |
| 95LB | 8.75" | 7.89" | 8.00" |
| 100LB | 9.00" | 8.00" | 8.00" |
| 105LB | 9.00" | 8.25" | N/A |
| 110LB | 9.00" | 8.50" | N/A |
| 115LB | 9.00" | 8.50" | N/A |
| 120LB | 9.00" | 8.50" | N/A |
| VINYL &NEOPRENE DB's | BSTVD | BSTND |
| 1LB | 1.53" | 1.53" |
| 2LB | 2.06" | 2.06" |
| 3LB | 2.20" | 2.20" |
| 4LB | 2.35" | 2.35" |
| 5LB | 2.55" | 2.55" |
| 6LB | 2.80" | 2.80" |
| 7LB | 2.91" | 2.91" |
| 8LB | 2.95" | 2.95" |
| 9LB | 3.14" | 3.14" |
| 10LB | 3.20" | 3.20" |
| 12LB | 3.37" | 3.37" |
| 15LB | 3.88" | 3.88" |
Body Solid Pro Clubline 3-tier Dumbbell RackSDKR1000DB
Specifications:
| Assembled Dimensions: | Length | Width | Height | |
| 70.00in / 1,778.00mm | 32.00in / 812.80mm | 43.00in/1,092.20mm |
LIFETIME: Frame & Welds
LIFETIME: Pulleys, Bushings, Bearings, Hardware, Plates, Guide Rods
LIFETIME: Cables, Upholstery, Grips (Normal Wear)